Walls, ceilings, trim, doors and cabinetry. The same prep discipline we bring to decorative finishes — patched surfaces, masked floors, sharp cut lines and a walkthrough at the end.

Measured on wall area. The range reflects how much prep the walls need, how many colours, and whether trim and ceilings are included.
| Scope | Rate |
|---|---|
Walls only, one colour Standard prep, two coats. Best rate on larger jobs. | $2.50 – $3.25 per sq ft |
Walls with trim & doors Cut-in trim, door casings and baseboards alongside the walls. | $3.25 – $4 per sq ft |
Heavy prep or multi-colour Patching, skim coat, colour changes room to room, or dark-over-light coverage. | $3.75 – $4.50 per sq ft |
Ceilings Flat ceiling paint, quoted on ceiling area. | $1.75 – $2.50 per sq ft |
Cabinets & built-ins Sprayed or hand-laid, doors removed and finished off site where needed. | Quoted per project |
Rates cover labour, standard patching, masking, floor protection and two coats of premium low-VOC paint. Extensive drywall repair, texture removal, wallpaper stripping and fixture removal are quoted separately once we see the walls.
Floors, furniture and fixtures masked and covered before a brush is opened.
Nail holes, dents and cracks filled and sanded flat. Spot-primed so they do not flash.
Sharp hand-cut lines at ceilings and trim, then two full coats rolled out evenly.
Daily tidy-up, paint left labelled for touch-ups, final walkthrough together.
$2.50 to $4.50 per square foot of wall area. Walls only in one colour run $2.50–$3.25; adding trim and doors brings it to $3.25–$4; heavy prep or multi-colour work is $3.75–$4.50. Ceilings are quoted separately at $1.75–$2.50 per square foot.
We can supply it or you can. We use premium low-VOC lines and will price the exact product and quantity in the written quote so there are no surprises either way.
A standard room is one to two working days including prep and two coats. Whole-home interiors typically run three to seven days depending on square footage and how much trim is involved.
Yes. Cabinets are quoted per project rather than per square foot, because the work is in the doors — degreasing, sanding, priming and either spraying or hand-laying the finish.